The SNA2550 is a 400 kHz ÷ 2.5 GHz (100 kHz ÷ 2.6 GHz) P.C. based portable analyzer for the measurement of the transfer function of two ports electronic devices.
Transmitted and reflected power are plotted on a frequency/level diagram directly on a Personal Computer screen exactly like in the traditional network analyzers.
The instrument consists of a RF box to be connected with the device under test and a P.C.
Thanks to the supplied software the measured data are acquired, displayed and saved on the PC.

Features:

• RF Out: 57dBµV to 107dBµV (0 dBm) full scale adjustable level in 1dB step
• RF in: 57dBµV to 110dBµV full scale measuring range
• Linear dynamic range: 60dB
• 20 + 10 + 10 dB switching attenuators
• Scan sweep: full-range or on selected frequency limits
• Selectable Start-Stop-Centre frequency limits
• Scan time and speed: T min. 500 ms for full span, 100 points/100ms
• Autocal. function through a supplied calibrated coax. Cable

Software Specifications:

• Main cockpit for measuring setup, attenuators, limits and frequency scan mode
• Real time scan with level-frequency plot over the selected range
• Save and Recall of the plotted diagram together with the relevant setup
• Win 2000/XP/Vista environment
• USB 2.0 port
• Pass Test-Fail
• TCP/IP Server for remote control

Accessories:

• ELAD E-5612: 5 - 6 GHz converter
• ELAD ED500: 100kHz – 400MHz, 95dB dynamic range external detector
• Battery pack for extended power